Our CNC machines

Our current machine specifications include:

Machines CNC, The Haas VF4Haas VF4 – Vertical Machining Centre

Haas Automation’s VF-4 vertical machining centre has 1,270 x 508 x 635 mm xyz travels and is built using all cast-iron components.

The Haas VF-4 is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately-sized machine. The VF-4 has a 40-taper cartridge spindle driven by a 30 hp vector Dual-Drive (Y-Delta) drive. The VF-4 produces either 75 ft-lb of torque at a low 1,200 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox – and will also run up to 8,100 rpm in 1.2 seconds for finishing aluminium.

Machines CNC, the Haas ST-30Haas ST-30 CNC Turning Centre

The ST-30 is the latest Haas high-performance turning center – designed to provide heavy cutting ability, extreme rigidity and high thermal stability. It has a maximum cutting capacity of 533 x 660 mm, with maximum swings of 806 mm over the front apron and 527 mm over the cross slide.

The standard 30 hp spindle yields 275 ft-lb of torque at 700 rpm, and spins to 3400 rpm. For heavy cutting operations, an optional 2-speed gearbox increases torque to 840 ft-lb at 200 rpm. The A2-6 spindle nose is equipped with a 10″ hydraulic 3-jaw chuck. The machine is equipped with a 12-station bolt-on style tool turret.

Machines CNC, The Haas TL-1Haas TL-1 CNC Tool-room Lathe

With a functional range from manual turning to full CNC, the Haas TL-1 Tool-room Lathe features a proprietary conversational operating system that makes cutting parts and creating part programs nearly effortless. The operator chooses an operation, touches off the X and Z surfaces, and is then prompted to enter basic dimension information.

Haas VF-3 Vertical Machining Centre

The Haas VF-3 vertical machining centre has 1016 x 508 x 635 mm xyz travels and is built using all American-made cast-iron components.


The Haas VF-3 is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately-sized machine. The VF-3 has a 40-taper cartridge spindle driven by a 30 hp vector Dual-Drive (Y-Delta).


.Haas SL30 with servo 300 bar feed



Chuck Size: 10 “
Bar Capacity: 3 “
# Axis: 2
Power: 30 hp
Max RPM: 20 rpm
Turning Dia: 17 “
Swing: 30 “
Machining Length: 39 “
Tailstock: Yes

Daewoo Puma 8S CNC Lathe with bar feed


Full Specification Chuck Size 200mm (8”)

Maximum Bore Size 52mm (2”)

Maximum Turned Diameter 360mm (14.2”)

Maximum Swing Over Bed/Carriage 500mm (19.7”), 274mm (10.8”)

Maximum Turned Length 380mm (14.6”)

Spindle Speeds Nose A2-6 Spindle Motor 20HP Rapids (X/Z) 2.3m/min., 2.5m/min.

X Axis Travel 7.9” Z 50 – 5,000rpm Spindle Bore 620mm (2.44”)

Spindle Axis Travel 15” Turret Index – Single Step/Full Index 1 sec./1.5 secs

Tailstock Taper 4MT Machine Dimensions L x W x H 2,300mm x 1,7by90mm x 1,722mm

BD4 Engineers are proudly supported by

Haas Logo